Our Products
For up-to-date information on available Oil & petrochemical products and prices, visit and follow PICO's official LinkedIn page
High Density Polyethylene (HDPE)
HDPE is known for its highly crystalline structure, consisting of long, straight chains of polyethylene molecules, which give it a dense, rigid, and strong composition. It is produced using a low-pressure process through either slurry polymerization or gas-phase polymerization methods. These processes create tightly packed molecules with minimal branching, resulting in a high-density material.
HDPE is highly resistant to chemicals, moisture, and impact, making it ideal for applications such as pipes, bottles, containers, and geomembranes. It also has excellent tensile strength and is UV-resistant, which enhances its durability in outdoor applications. Industries such as packaging, automotive, and construction rely heavily on HDPE for products like water and gas pipes, chemical containers, and fuel tanks. Its versatility and recyclability further increase its demand in both industrial and consumer applications.
We provide wide ranges of grades such as:
EX1, EX2, EX3, EX4, EX5, BL2, BL3, BL4, BL5, BL6, BL7, BL8, I1, I2, I3, I4 and etc.
HDPE
BL2
(GF 4750)
Product DescriptionBL2 (GF 4750) is a high-density polyethylene with Butene-1 as comonomer. It is high impact strength and slightly lower stiffness than BL3, high stress cracking resistance (ESCR) even in contact with surfactants | Applicationscaps & Closures
| |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190°C/5Kg) |
g/10min |
ISO 1133 |
1.2±0.3 |
|
2 |
2 MFI (190°C/21.6Kg) |
g/10min |
ISO 1133 |
23±4 |
|
3 |
FRR (21.6/5) |
----- |
----- |
19 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.946±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
10 |
|
6 |
Swell Ratio |
% |
Internal Method |
110±15 |
HDPE
BL3
(GF 4760)
Product DescriptionBL3 (GF 4760) is a high-density polyethylene with Butene-1 as comonomer. The product is high density and high stiffness, good flow ability and impact strength and good stress cracking resistance (ESCR).Stabilization: Ca-Stearate, Irganox1010, Irgafos168 | ApplicationsContainers with capacities ranging from a few ml up to 10 litersProduction of sheets for thermoforming | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190°C/5Kg) |
g/10min |
ISO 1133 |
1.2±0.3 |
|
2 |
2 MFI (190°C/21.6Kg) |
g/10min |
ISO 1133 |
23±4 |
|
3 |
FRR(21.6/5) |
----- |
----- |
19 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.954±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
9 |
|
6 |
Swell Ratio |
% |
Internal Method |
110±15 |
HDPE
BL4
(GM 8255)
Product DescriptionBL4 (GM 8255) is a high-density polyethylene with Butene-1 as comonomer. It is a high molar mass, easily process able, High stiffness and impact good stress cracking resistance (ESCR) and even good moulding surface finish.Stabilization: Ca-Stearate, Irganox1010, Irgafos 168 | ApplicationsGeneral purpose grade for containers from 1 liter to about 500 liters capacity | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
0.35±0.06 |
|
2 |
2 MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
8.5±2.0 |
|
3 |
FRR (21.6/5) |
----- |
----- |
24 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.952±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
25 |
|
6 |
Swell Ratio |
% |
Internal Method |
140±20 |
HDPE
BL6
(GM 7255)
Product DescriptionBL6 (GM 7255) is a high-density polyethylene with Butene-1 as comonomer. It is a high molar mass, easily process able, High stiffness and impact good stress cracking resistance (ESCR) and even good moulding surface finish.Stabilization: Ca-Stearate, Irganox1010, Irgafos 168, HOE Wax PED 191 | ApplicationsFor larg containers above 5 liter capacity for manufacture semi-finished products. | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
0.12±0.02 |
|
2 |
2 MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
2.7±0.4 |
|
3 |
FRR (21.6/5) |
----- |
----- |
23 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.952±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
42 |
|
6 |
Swell Ratio |
% |
Internal Method |
145±20 |
HDPE
BL7
(GM 6255)
Product DescriptionBL7 (GM 6255) is a high-density polyethylene with Butene-1 as comonomer. It is a high molar mass, easily process able, High stiffness and impact good stress cracking resistance (ESCR) and even good moulding surface finish.Stabilization: Ca-Stearate, Irganox1010, Irgafos 168, HOE Wax PED 191 | ApplicationsFor larg containers above e.g ring drums with 220 liters capacity. | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
≤ 0.1 |
|
2 |
2 MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
2.2±0.2 |
|
3 |
Density |
g/cm3 |
ISO 1183 |
0.950±0.002 |
|
4 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
≥ 45 |
|
5 |
Swell Ratio |
% |
Internal Method |
145±20 |
HDPE
BL8
(GM 7745)
Product DescriptionBL8 (GM 7745) is a high-density polyethylene with Butene-1 as comonomer. It is a special grade.Stabilization: Ca-Stearate, Irganox1010, Irgafos 168, Tinevin326, Tinevin622 | ApplicationsFor heating oil storage tank.Large containers for various chemicals | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
0.31±0.04 |
|
2 |
2 MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
7.5±1.5 |
|
3 |
FRR (21.6/5) |
----- |
----- |
24 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.44±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
19 |
| 6 |
Swell Ratio |
% |
Internal Method |
135±20 |
HDPE
EX1
(GF 7740F2)
Product DescriptionEX1 (GF 7740F2) is a high-density polyethylene with Butene-1 as comonomer. It is a medium molecular mass with a narrow molar mass distribution.Stabilization: Ca-Stearate, Irganox1010, Irgafos 168 | ApplicationsStretched film tape used in manufacture of knitted and woven fabrics (Agricultural packaging and protective cover) | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
1.6±0.4 |
|
2 |
MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
22±4 |
|
3 |
FRR (21.6/5) |
----- |
----- |
14±2 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.944±0.002 |
|
5 |
Gel Number |
----- |
Internal Method |
≤4 |
|
6 |
Gel Size |
µm |
Internal Method |
≤150 |
HDPE
EX2
(GM 7750)
Product DescriptionEX2 (GM 7750) is a high-density polyethylene with propylene comonomer. It is a medium molecular mass with a narrow molar mass distribution.Stabilization: Ca-Stearate, Irganox1010, Irgafos 168 | ApplicationsProduction of monofilaments with high tensile strength. | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
2.5±0.4 |
|
2 |
MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
27±3 |
|
3 |
FRR (21.6/5) |
----- |
----- |
10.5±1 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.960±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
5 |
|
6 |
Gel Number |
----- |
Internal Method |
≤5 |
|
7 |
Gel Size |
µm |
Internal Method |
≤150 |
HDPE
EX3
(GM 2010 T2N)
Product DescriptionEX3 (GM 2010 T2N) is a natural-colored high-density polyethylene with Butene-1 as comonomer. The product is classified as PE100 and show good stress crack resistance properties (ESCR) combined with good impact strength.Stabilization: Ca-Stearate, Zn-Stearate, Irganox1010, Irgafos 168 | ApplicationsPipe Extrusion PE100 classPressure pipeDrinking water and gas pipesSewer pipes and their fittingsFor injection moulded and other fit thingsSheets | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
0.45±0.05 |
|
2 |
MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
12.0±3.0 |
|
3 |
FRR (21.6/5) |
----- |
----- |
28±4 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.945±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
˃12 |
|
6 |
Pipe Evaluation Hydrostatic Strength (80oc, 4N/mm2) |
Hours |
DIN 8047 / DIN 8075 / ISO 1167 |
100 min |
HDPE
EX4
(GM 9455 F)
Product DescriptionEX4 (GM 9455F) is a high-density polyethylene with Butene-1 as comonomer. It is high molar mass for blown film with very high stiffness and good tenacity.Stabilization: Ca-Stearate, Zn-Stearate, Irganox1010, Irgafos 168 | ApplicationsPaper like film suitable for wrappingCounter bag and carrier bags | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
0.28±0.07 |
|
2 |
MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
8±2 |
|
3 |
FRR (21.6/5) |
----- |
----- |
29 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.956±0.002 |
|
5 |
Gel Number |
----- |
Internal Method |
3 |
|
6 |
Gel Size |
µm |
Internal Method |
≤120 |
HDPE
EX5
(GM 9450 F)
Product DescriptionEX5 (GM 9450 F) is a high-density polyethylene with Butene-1 as comonomer. It is high molar mass for blown film with in comparison to EX4 lower stiffness and increased tenacity. The product has good toughness, low gel level and good tear strength.Stabilization: Ca-Stearate, Zn-Stearate, Irganox1010, Irgafos 168 | ApplicationsFood gradeBlown film with paper like qualitySuitable for counter bagsCarrier bagsWrapping film and sheetsBlending partner | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
0.28±0.07 |
|
2 |
MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
8±2 |
|
3 |
FRR (21.6/5) |
----- |
----- |
30±4 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.949±0.002 |
HDPE
I1
(GA 7260)
Product DescriptionI1 (GA 7260) is a high-density polyethylene with propylene as comonomer. It is very easy flowing, high density, hardness and stiffness, largely warpage free, for mass product articles in rapid shot frequence.Stabilization: Ca-Stearate, Zn-Stearate, MgO, Irganox1010, UM V13 | ApplicationsLightweight householdDisposable articlesLarge moulding and complicated parts where high impact strength and stress cracking resistance (ESCR) are not demanded. | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
17±3 |
|
2 |
MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
52±8 |
|
3 |
FRR (21.6/5) |
----- |
----- |
3±0.8 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.957±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
2 |
HDPE
I2
(GB 7250)
Product DescriptionI2 (GB 7250) is a high-density polyethylene with propylene as comonomer. It is easy flowing, low warpage, less hard and stiff I1.Stabilization: Ca-Stearate, Irganox1010 | ApplicationsHousehold articleClosures/sealsPackaging | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
10±1.4 |
|
2 |
MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
28±4 |
|
3 |
FRR (21.6/5) |
----- |
----- |
2.8±0.7 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.950±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
3 |
HDPE
I3
(GC 7260)
Product DescriptionI3 (GC 7260) is a high-density polyethylene with propylene as comonomer. The product has good impact strength, good stress cracking resistance (ESCR), low warping and good flow ability as well as high density, hardness and stiffnessStabilization: Ca-Stearate, Irganox1010 | ApplicationsTransport and stacking cratesParticularly bottle cratesEngineering partsClosures | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
8.0±1.0 |
|
2 |
MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
23±3 |
|
3 |
FRR (21.6/5) |
----- |
----- |
2.8±0.6 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.957±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
3.0 |
HDPE
I4
(GD 7255)
Product DescriptionI4 (GD 7255) is a high-density polyethylene with propylene as comonomer. It has high impact strength and low warping tendency.Stabilization: Ca-Stearate, Irganox1010, Irganox168 | ApplicationsFor thick walled, high stressed transport containers e.g., refuse bins and fish crates. | |
|
No |
Properties |
Unite |
Test Method |
Value |
|
1 |
MFI (190 °C/5Kg) |
g/10min |
ISO 1133 |
4.0±0.7 |
|
2 |
MFI (190 °C/21.6Kg) |
g/10min |
ISO 1133 |
11±2 |
|
3 |
FRR (21.6/5) |
----- |
----- |
2.8±0.9 |
|
4 |
Density |
g/cm3 |
ISO 1183 |
0.954±0.002 |
|
5 |
Notched Impact Strength |
mJ/mm2 |
ISO 179/1eA |
4 |
Low Density Polyethylene (LDPE)
LDPE is characterized by a highly branched molecular structure, which results in a less dense and more flexible material compared to HDPE. The production process involves high-pressure free-radical polymerization, which creates side branches on the polymer chains. This structure gives LDPE its low density, softness, and flexibility.
LDPE is known for its transparency, moisture resistance, and low melting point, making it ideal for applications requiring flexibility and durability. It is widely used in packaging, such as plastic bags, films, and containers, as well as in coatings for cables and wires. Additionally, LDPE is often found in consumer products like squeeze bottles and liners. While it has lower tensile strength than HDPE, its flexibility and ability to withstand high temperatures make it a preferred material for many industries.
We provide wide ranges of grades such as :
2420K, 2420D, 2420F, 2420H, 2426F, 2426H, 2426K, 3020K, 3020H, 3026K, 2200D, 2200F, 2206F, 2220H, 3026H, 2200H, 2206H ,1800S
LDPE
Lupolen 3026 H
Product Description
Lupolen 3026 H is an additivated, low density Polyethylene with high rigidity. It contains slip and anti-blocking agent. It is delivered in pellet form.
ApplicationsCast & Blown FilmBags & PouchesFilm & Shrink FilmFood Packaging FilmSurface Protection Film | Processing MethodBlown FilmCast Film | FeaturesOpticalGood ProcessabilityUnspecified SlipLow FrictionGood Stiffness |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Density |
0.927 |
g/cm3 |
ISO 1183 |
|
2 |
Melt flow rate (MFR)(190°C/2.16Kg) |
2.0 |
g/10 min |
ISO 1133 |
|
3 |
Tensile Modulus |
300 |
MPa |
ISO 527-1, -2 |
|
4 |
Tensile Stress at Yield |
13.0 |
MPa |
ISO 527-1, -2 |
|
5 |
Tensile Strain MD/TD |
25/18 |
MPa |
ISO 527-1, -3 |
|
6 |
Tensile strength at Break MD/TD |
350/600 |
% |
ISO 527-1, -3 |
|
7 |
Dart Drop Impact (50 blown film) |
110 |
g |
ASTM D 1709 |
|
8 |
Vicat softening temp (A50 (50 °C/h 10N)) |
100 |
°C |
ISO 306 |
|
9 |
Haze (50) |
<7.0 |
% |
ASTM D 1003 |
|
10 |
Gloss (60° ,50) |
>110 |
|
ASTM D 2457 |
LDPE
Lupolen 2420 D
Product Description
Lupolen 2420 D is a non -additivated, low density Polyethylene, it is delivered in pellet form.
ApplicationsBags & Pouches
| Processing MethodInjection MouldingBlown FilmExtrusion Blow Moulding | FeaturesGood Processability, Good Tear Strength, Good Toughness |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Density |
0.923 |
g/cm3 |
ISO 1183 |
|
2 |
Melt flow rate (MFR)(190°C/2.16Kg) |
0.25 |
g/10 min |
ISO1133 |
|
3 |
Tensile Modulus |
240 |
MPa |
ISO 527-1, -2 |
|
4 |
Tensile Stress at Yield |
10 |
MPa |
ISO 527-1, -2 |
|
5 |
Tensile strength at Break MD/TD |
27/20 |
MPa |
ISO 527-1, -3 |
|
6 |
Tensile Strain at Break MD/TD |
200/500 |
% |
ISO 527-1, -3 |
|
7 |
Dart Drop Impact (50 blown film) |
250 |
g |
ASTM D 1709 |
|
8 |
Vicat softening temp (A50 (50 °C/h 10N)) |
94 |
°C |
ISO 306 |
|
9 |
Haze (50) |
<14 |
% |
ASTM D 1003 |
|
10 |
Gloss (60° ,50) |
˃50 |
|
ASTM D 2457 |
LDPE
Lupolen 2420 F
Product Description
Lupolen 2420 F is a non-additivated, low density Polyethylene, it is delivered in pellet form.
ApplicationsBags & Pouches
| Processing MethodInjection MouldingBlown FilmExtrusion Blow Moulding | FeaturesGood Heat Seal, Optical, Good Processability, Good Melt Strength |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Density |
0.923 |
g/cm3 |
ISO 1183 |
|
2 |
Melt flow rate (MFR)(190°C/2.16Kg) |
0.75 |
g/10 min |
ISO 1133 |
|
3 |
Tensile Modulus |
260 |
MPa |
ISO 527-1, -2 |
|
4 |
Tensile Stress at Yield |
11 |
MPa |
ISO 527-1, -2 |
|
5 |
Tensile Strain MD/TD |
26/20 |
MPa |
ISO 527-1, -3 |
|
6 |
Tensile strength at Break MD/TD |
300/600 |
% |
ISO 527-1, -3 |
|
7 |
Dart Drop Impact (50 blown film) |
150 |
g |
ASTM D 1709 |
|
8 |
Vicat softening temp (A50 (50 °C/h 10N)) |
96 |
°C |
ISO 306 |
|
9 |
Haze (50) |
˂8.0 |
% |
ASTM D 1003 |
|
10 |
Gloss (60° ,50) |
˃90 |
|
ASTM D 2457 |
LDPE
Lupolen 2420 H
Product Description
Lupolen 2420 H is a non-additivated, low density Polyethylene, it is delivered in pellet form.
ApplicationsBags & PouchesShrink FilmBlown FilmFilmCast Film | Processing MethodCast FilmBlown Film | FeaturesGood Heat SealOpticalGood Processability |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Density |
0.924 |
g/cm3 |
ISO 1183 |
|
2 |
Melt flow rate (MFR)(190°C/2.16Kg) |
1.9 |
g/10 min |
ISO 1133 |
|
3 |
Tensile Modulus |
260 |
MPa |
ISO 527-1, -2 |
|
4 |
Tensile Stress at Yield |
11 |
MPa |
ISO 527-1, -2 |
|
5 |
Tensile Strain MD/TD |
26/18 |
MPa |
ISO 527-1, -3 |
|
6 |
Tensile strength at Break MD/TD |
250/600 |
% |
ISO 527-1, -3 |
|
7 |
Dart Drop Impact (50 blown film) |
110 |
g |
ASTM D 1709 |
|
8 |
Vicat softening temp (A50 (50 °C/h 10N)) |
94 |
°C |
ISO 306 |
|
9 |
Haze (50) |
<8,0 |
% |
ASTM D 1003 |
|
10 |
Gloss (60° ,50) |
>100 |
|
ASTM D 2457 |
LDPE
Lupolen 2426 F
Product Description
Lupolen 2426 F is an additivated, low density Polyethylene. it contains slip and anti-blocking agent. It is delivered in pellet form.
ApplicationsCast & Blown FilmBags& PouchesFilm & Shrink FilmFood Packaging FilmSurface Protection Film | Processing MethodBlown Film | FeaturesUnspecified Non-BlockingOpticalGood ProcessabilityUnspecified SlipLow Friction |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Density |
0.924 |
g/cm3 |
ISO 1183 |
|
2 |
Melt flow rate (MFR)(190°C/2.16Kg) |
0.75 |
g/10 min |
ISO 1133 |
|
3 |
Tensile Modulus |
260 |
MPa |
ISO 527-1, -2 |
|
4 |
Tensile Stress at Yield |
11 |
MPa |
ISO 527-1, -2 |
|
5 |
Tensile Strain MD/TD |
26/20 |
MPa |
ISO 527-1, -3 |
|
6 |
Tensile strength at Break MD/TD |
300/600 |
% |
ISO 527-1, -3 |
|
7 |
Dart Drop Impact (50 blown film) |
150 |
g |
ASTM D 1709 |
|
8 |
Vicat softening temp (A50 (50 °C/h 10N)) |
96 |
°C |
ISO 306 |
|
9 |
Haze (50) |
<9.0 |
% |
ASTM D 1003 |
|
10 |
Gloss (60° ,50) |
>90 |
|
ASTM D 2457 |
LDPE
Lupolen 3020 F
Product Description
Lupolen 3020 F is a non-additivated, low density Polyethylene with high rigidity, good optical and good chemical resistance. It is delivered in pellet form.
ApplicationsBags& PouchesCast & Blown FilmFilm & Shrink FilmFood Packaging FilmSurface Protection Film | Processing MethodBlown Film | FeaturesOpticalGood ProcessabilityGood Stiffness |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Density |
0.927 |
g/cm3 |
ISO 1183 |
|
2 |
Melt flow rate (MFR)(190°C/2.16Kg) |
0.9 |
g/10 min |
ISO 1133 |
|
3 |
Tensile Modulus |
300 |
MPa |
ISO 527-1, -2 |
|
4 |
Tensile Stress at Yield |
13.0 |
MPa |
ISO 527-1, -2 |
|
5 |
Tensile Strain MD/TD |
27/19 |
MPa |
ISO 527-1, -3 |
|
6 |
Tensile strength at Break MD/TD |
300/600 |
% |
ISO 527-1, -3 |
|
7 |
Dart Drop Impact (50 blown film) |
120 |
g |
ASTM D 1709 |
|
8 |
Vicat softening temp (A50 (50 °C/h 10N)) |
100 |
°C |
ISO 306 |
|
9 |
Haze (50) |
<6.5 |
% |
ASTM D 1003 |
|
10 |
Gloss (60° ,50) |
>100 |
|
ASTM D 2457 |
LDPE
Lupolen 3020 H
Product Description
Lupolen 3020 H is a non-additivated, low density Polyethylene with high rigidity, good optical and good chemical resistance. It is delivered in pellet form.
ApplicationsBags& PouchesCast & Blown FilmFilm & Shrink FilmFood Packaging FilmSurface Protection Film | Processing MethodBlown FilmCast Film | FeaturesGood Heat sealOpticalGood ProcessabilityGood Stiffness |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Density |
0.927 |
g/cm3 |
ISO 1183 |
|
2 |
Melt flow rate (MFR)(190°C/2.16Kg) |
2.0 |
g/10 min |
ISO 1133 |
|
3 |
Tensile Modulus |
300 |
MPa |
ISO 527-1, -2 |
|
4 |
Tensile Stress at Yield |
13.0 |
MPa |
ISO 527-1, -2 |
|
5 |
Tensile Strain MD/TD |
25/18 |
MPa |
ISO 527-1, -3 |
|
6 |
Tensile strength at Break MD/TD |
350/600 |
% |
ISO 527-1, -3 |
|
7 |
Dart Drop Impact (50 blown film) |
110 |
g |
ASTM D 1709 |
|
8 |
Vicat softening temp (A50 (50 °C/h 10N)) |
100 |
°C |
ISO 306 |
|
9 |
Haze (50) |
<6.5 |
% |
ASTM D 1003 |
|
10 |
Gloss (60° ,50) |
>110 |
|
ASTM D 2457 |
LDPE
Lupolen 3020 K
Product Description
Lupolen 3020 K is a non-additivated, low density Polyethylene with high rigidity, good optical and good chemical resistance. It is delivered in pellet form.
ApplicationsCast & Blown FilmLamination FilmFilm & Shrink FilmFood Packaging FilmSurface Protection Film | Processing MethodBlown FilmCast FilmInjection Moulding | FeaturesGood Heat sealOpticalGood ProcessabilityGood Stiffness |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Density |
0.927 |
g/cm3 |
ISO 1183 |
|
2 |
Melt flow rate (MFR)(190°C/2.16Kg) |
4.0 |
g/10 min |
ISO 1133 |
|
3 |
Tensile Modulus |
300 |
MPa |
ISO 527-1, -2 |
|
4 |
Tensile Stress at Yield |
13.0 |
MPa |
ISO 527-1, -2 |
|
5 |
Tensile Strain MD/TD |
20/15 |
MPa |
ISO 527-1, -3 |
|
6 |
Tensile strength at Break MD/TD |
350/600 |
% |
ISO 527-1, -3 |
|
7 |
Dart Drop Impact (50 blown film) |
100 |
g |
ASTM D 1709 |
|
8 |
Vicat softening temp (A50 (50 °C/h 10N)) |
97 |
°C |
ISO 306 |
|
9 |
Haze (50) |
<6.5 |
% |
ASTM D 1003 |
|
10 |
Gloss (60° ,50) |
>115 |
|
ASTM D 2457 |
LDPE
Lupolen 1800 S
Product Description
Typical application includes caps & closures, engineering parts and leisure & sports equipment.
Applicationscaps & Closures
| Processing MethodInjection Moulding | FeaturesFast Cycle (Production)Low DensityGood FlexibilityGood Processability |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Density |
0.917 |
g/cm3 |
ISO 1183 |
|
2 |
Melt flow rate (MFR)(190°C/2.16Kg) |
20.0 |
g/10 min |
ISO1133 |
|
3 |
Tensile Modulus |
150 |
MPa |
ISO 527-1, -2 |
|
4 |
Tensile Stress at Yield |
8.0 |
MPa |
ISO 527-1, -2 |
|
5 |
Vicat softening temp (A50 (50 °C/h 10N)) |
80 |
°C |
ISO 306 |
Linear Low Density Polyethylene (LLDPE)
LLDPE has a structure similar to LDPE but with less branching, which results in a linear molecular structure with short, uniform branches. This material is produced through copolymerization of ethylene with alpha-olefins (like butene or hexene) in a low-pressure process. The result is a polyethylene that combines the flexibility of LDPE with the strength and durability of HDPE.
LLDPE is valued for its toughness, puncture resistance, and flexibility, which makes it ideal for products like stretch films, plastic wraps, and agricultural films. It is also used in applications such as geomembranes, cables, and industrial liners. Due to its improved mechanical properties over LDPE, LLDPE is increasingly favored in packaging and agricultural industries where durability and resistance to environmental conditions are crucial.
We provide wide ranges of LLDPE grades including but NOT LIMITED to LL0220 KJ, HD6070EA, HD6070UA, LL0205AA, HD5226EA, LL0209AA, LL0220AA, LL0209K and more.
LLDPE
LL0220 AA
Applications
Food grade
Light and medium duty film
Stretch film
Product Description"LL 0220 AA" is a LLDPE copolymer with butene as comonomer which contains antioxidant.This grade is suitable for the production of blown film for light duty applications and for the production of cast stretch film.Film made from LL 0220 AA can be produced at higher output compared to standard 1 MFR LLDPE butene copolymers.Neutralizer: Zinc OxideAntioxidant: Irganox1010, Irganox168 |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Melt flow rate (2.16Kg) |
2.2 |
g/10 min |
ISO 1133 |
|
2 |
Density |
920 |
Kg/cm3 |
ISO 1183 |
|
3 |
Tensile strength at Yield MD/TD |
10/11 |
MPa |
ISO 527 |
|
4 |
Tensile strength at Break MD/TD |
36/28 |
MPa |
ISO 527 |
|
5 |
Elongation at Break MD/TD |
600/800 |
% |
ISO 527 |
|
6 |
Tear strength MD/TD |
110/300 |
g/25µ |
ASTM D1922 |
|
7 |
Dart Drop Impact |
130 |
g |
ASTM D1709 |
|
8 |
Vicat softening T° |
93 |
°C |
ISO 306 |
LLDPE
LL0220 KJ
Applications
Light and medium duty film
Product Description"LL 0220 KJ" is a LLDPE copolymer with butene-1 as comonomer which contains antioxidant, slip and antilock additives. This grade is suitable for the production of blown film for light duty applications with a high slip requirement. Film made from LL 0220 KJ can be produced at higher output compared to standard 1 MFR LLDPE butene copolymers. |
| |||||||||||||||||||
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Melt flow rate (2.16Kg) |
2.4 |
g/10 min |
ISO 1133 |
|
2 |
Density |
921 |
Kg/cm3 |
ISO 1183 |
|
3 |
Tensile strength at Yield MD/TD |
10/11 |
MPa |
ISO 527 |
|
4 |
Tensile strength at Break MD/TD |
36/28 |
MPa |
ISO 527 |
|
5 |
Elongation at Break MD/TD |
600/800 |
% |
ISO 527 |
|
6 |
Tear strength MD/TD |
110/300 |
g/25µ |
ASTM D1922 |
|
7 |
Dart Drop Impact |
130 |
g |
ASTM D1709 |
|
8 |
Vicat softening T° |
93 |
°C |
ISO 306 |
LLDPE
LL0205 AA
Applications
Heavy duty sacks, mulch films.
Stretch film, liners, geomembrane
Product Description"LL 0205 AA" is a LLDPE copolymer with butene as comonomer which contains anti-oxidant.This grade is especially suitable for use pure for hand wrap stretch film or blended with LDPE for heavy duty sacks.Film made from LL 0205 AA shows improved toughness compared to standard 1 MFR LLDPE butene copolymerNeutralizer: calcium stearateAntioxidant: Irganox1010, Irganox168 |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Melt flow rate (190°C/2.16Kg) |
0.5 |
g/10 min |
ISO 1133 |
|
2 |
Density |
920 |
Kg/cm3 |
ISO 1183 |
|
3 |
Tensile strength at Yield MD/TD |
10/11 |
MPa |
ISO 527 |
|
4 |
Tensile strength at Break MD/TD |
42/35 |
MPa |
ISO 527 |
|
5 |
Elongation at Break MD/TD |
600/700 |
% |
ISO 527 |
|
6 |
Tear strength MD/TD |
155/375 |
g/25µ |
ASTM D1922 |
|
7 |
Dart Drop Impact |
160 |
g |
ASTM D1709 |
LLDPE
LL0209 AA
Applications
Food Grade
Heave duty sacks, agricultural films, liners.
Produce bags, stretch film
At Portico International Commerce, we source our polyethylene products from leading Iranian petrochemical plants, renowned for producing some of the highest quality polyethylene in the global market. Iranian polyethylene stands out due to its superior purity, consistency in production, and competitive pricing. These advantages ensure that our products meet international standards while offering enhanced performance across various applications. Whether you need polyethylene for packaging, construction, or industrial use, we provide a comprehensive range of grades and types, tailored to suit your industry’s specific needs.
Product Description"LL 0209AA" is a LLDPE copolymer with butene as comonomer which contains antioxidant. It is recommended for general purpose applications. It is suitable for blending with conventional LDPE. Film made from pure LL 02090 AA has the following advantages over conventional LDPE:Better sealing, higher puncture resistanceGreater drawdown capabilityHigher tensile strengthNeutralizer: calcium stearateAntioxidant: Irganox1010, Irganox168 |
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Melt flow rate (190°C/2.16Kg) |
0.9 |
g/10 min |
ISO 1133 |
|
2 |
Density |
920 |
Kg/cm3 |
ISO 1183 |
|
3 |
Tensile strength at Yield MD/TD |
10/11 |
MPa |
ISO 527 |
|
4 |
Tensile strength at Break MD/TD |
41/32 |
MPa |
ISO 527 |
|
5 |
Elongation at Break MD/TD |
620/840 |
% |
ISO 527 |
|
6 |
Tear strength MD/TD |
145/370 |
g/25µ |
ASTM D1922 |
|
7 |
Dart Drop Impact |
130 |
g |
ASTM D1709 |
LLDPE
LL0209 KJ
Applications
Food Grade
Refuse sacks
Produce bags, carrier bags
Product Description"LL 0209 KJ" is a LLDPE copolymer with butene as comonomer which contains antioxidant, Slip and antiblock additives. It gives film of high slip which is easily separable.It is recommended for general purpose applications. It is suitable for blending with conventional LDPE. Film made from pure LL 0209 KJ has the following advantages over conventional LDPE:- Easier sealing- Greater drawdown capability- Higher tensile strength- Higher puncture resistance |
| |||||||||||||||||||
|
No |
Properties |
Value |
Unite |
Test Method |
|
1 |
Melt flow rate (190°C/2.16Kg) |
0.9 |
g/10 min |
ISO 1133 |
|
2 |
Density |
921 |
Kg/cm3 |
ISO 1183 |
|
3 |
Tensile strength at Yield MD/TD |
10/11 |
MPa |
ISO 527 |
|
4 |
Tensile strength at Break MD/TD |
41/32 |
MPa |
ISO 527 |
|
5 |
Elongation at Break MD/TD |
620/840 |
% |
ISO 527 |
|
6 |
Tear strength MD/TD |
145/370 |
g/25µ |
ASTM D1922 |
|
7 |
Dart Drop Impact |
150 |
g |
ASTM D1709 |
Our Process
1. Consultation: We begin by understanding your specific needs and objectives.
2. Sourcing: Our team works with trusted petrochemical plants to procure the best polyethylene for your requirements.
3. Logistics & Delivery: We coordinate the export process, ensuring timely and cost-effective delivery to your location.
4. Ongoing Support: After delivery, we provide continued support to ensure our products meet your expectations and performance standards.
If you have any question or need further information, please contact us.